HDQ-5042 DVB-T2 Modulator

HDQ-5042 DVB-T2 modulator is our new product developed complying with the DVB-T2 standard. With its advanced modulating technology, this modulator can effectively make use of the ground spectrum resources and make it possible to provide reliable signals for fixed, mobile and portable devices. Compared with DVB-T, the channel capacity is increased by 30% under the similar carrier to noise ratio (CNR) threshold
Moreover, this device can be upgraded and controlled through network system, which allows it to be widely used in setting up digital broadcasting network and provide good signals for scientific laboratory and DVB-T2 STB.

Technical specification












Modulation mode System A, system B (implementation)

(not implementation Multi-PLP)


(not  Multi-PLP)

2 bandwidth 5 MHz、6 MHz、7 MHz、8 MHz Yes
3 Bandwidth Extention Implementation bandwidth extention YES
4 FFT Mode 1K、2K、4K、8K、16K、32K

Extended 8K、16K、32K

5 Guard interval 1/128, 1/32, 1/16, 19/256, 1/8, 19/128, 1/4 YES
6 L1 modulation BPSK,QPSK, 16 QAM, 64 QAM YES
7 PLP modulation QPSK, 16 QAM, 64 QAM, 256 QAM (normal or rotated) YES
8 Pilots pattern PP1,PP2,PP3,PP4,PP5,PP6,PP7,PP8 YES
9 PAPR Tone reserved for PAPR YES
10 SISO implementation YES
11 MISO implementation NO
12 Single PLP  Single PLP(TYPE 1) YES
13 Multi-PLP Multi-PLP(TYPE 0 and TYPE 2) NO
14 Code rate 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 YES
15 CELL interleaving implementation YES
16 TIME-interleaving implementation YES
17 FEC type LDPC 64K、LDPC16K YES
18 ISSY  implementation NO
19 High -efficiency HEM YES
20 Rotated constellation Implementation rotated constellation YES
21 FEF  implementation NO